| Purpose | For businesses |
| Number of phases | 3 |
| Nominal power | 12000 |
| Peak power | 13200 |
| Input voltage | 220/380 |
| Maximum input current | 20 |
| Output voltage | 230/400 |
| Nominal output current | 17.4 |
| The shape of the output signal | Pure sine wave |
| Frequency | 50/60 Гц |
| Availability of battery | No |
| Rated battery voltage | 48 |
| Input DC voltage range for charging | 40 – 60 |
| Maximum battery charging current | 240 |
| Availability of MPPT | Yes |
| Number of MPPT trackers | 2 |
| Maximum PV power | 19200 |
| Voltage range PV | 200-650 |
| Maximum PV input voltage | 800 |
| Nominal voltage MRRT | 550 |
| MPPT maximum input current | 2 x 26 |
| Operating temperature | -40°C – +60°C |
| Working humidity | 0–100% |
| The degree of protection of the case | IP65 |
| Defenses |
DC Reverse Polarity Protection AC Output Overcurrent Protection Thermal Protection AC Output Overvoltage Protection AC Output Short Circuit Protection DC Component Monitoring Arc Fault Circuit Interrupter (optional) Anti-islanding Protection DC Switch Insulation Impedance Detection Residual Current Detection |
| Communication interface |
RS485/RS232 CAN |
| Additionally |
Max. Continuous AC Passthrough (grid to load) (A) - 45 Peak Power (off-grid) (W) 2 times of rated power, 10s Power Factor Adjustment Range - 0.8 Max. Efficiency - 97.6% Monitor Mode - GPRS/WIFI/Bluetooth/4G/LAN(optional) Noise (dB) - ≤55 Intelligent Air Cooling Max. 10 pcs parallel for on-grid and off-grid operation Support multiple batteries parallel Support storing energy from diesel generator Transformer isolation design |
| Dimensions | 386 x 660 x 250 |
| Weight | 35.2 |
Comments (0)
Только зарегистрированные пользователи могут оставлять комментарии